Join 2 Networks

Home Forums Networking Cisco Routers & Switches How-to Join 2 Networks

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    squid4040
    Member
    #128362

    The current topology is
    Network 1 I have 60 machines they get get IPs from a DHCP 192.168.0.x
    they all connect to 2 48 port cisco switch 2950XL and 1 1720 cisco
    router has two interfaces 1 to the internet the other to local LAN
    Network 2 has 4 servers with IPs 10.0.0.x a switch and cisco PIX
    firewall, the pix has 2 network interfaces 1 is GW for the servers and
    192.168.10.x for the external network.
    Incase i want to access servers on network 2 I have to change the ips
    192.168.0.x to 192.168.10.x with a GW of PIX outside interface.
    I want to join both networks. I do not want to keep on changing the
    addresses. Below is a show ver for 1720

    Cisco IOS Software, C1700 Software (C1700-Y-M), Version 12.3(14)T1,
    RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2005 by Cisco Systems, Inc.
    Compiled Thu 31-Mar-05 13:40 by yiyan
    ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
    gw-router uptime is 4 days, 20 hours, 5 minutes
    System returned to ROM by power-on
    System image file is “flash:c1700-y-mz.123-14.T1.bin”
    Cisco 1721 (MPC860P) processor (revision 0x500) with 56468K/9068K
    bytes of memory.
    Processor board ID FOC09181RTT (4115645989), with hardware revision
    0000
    MPC860P processor: part number 5, mask 2
    1 Ethernet interface
    1 FastEthernet interface
    32K bytes of NVRAM.
    32768K bytes of processor board System flash (Read/Write)
    Configuration register is 0x2102

    Thanks

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.