Cisco ASA5540

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    hwegener
    Member
    #128416

    I have just been handed a Cisco ASA5540 to implement and with no training, I am finding it difficult to implement. Can anyone help or point me to a step-by-step getting started document. I have run through the “getting started” wizard, but I am still not successful in getting through. What are the basic settings that must be in place?

    I have port 0/0 set as the external interface, with our ISP assigned static IP address, security level 0

    I have port 0/1 set as our internal interface, with a 192.168.5.x address (our internal network) Security level 90

    I have the management interface 192.168.1.1 left as default.

    Under policies I have added a outgoing policy, source Internal interface, destination external interface, TCP, any protocol

    I have added a Admin password, default is none.

    What am I missing?

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.