Urgent! Natting Issue on Pix 501

Home Forums Networking Cisco Security – PIX/ASA/VPN Urgent! Natting Issue on Pix 501

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #155181

    Hi,

    I’m having an issue on my Pix 501- ver. 6.3(5) firewall when i issue command sh xlate so don’t see anything and i think i must enable natting on this firewall as same as on ASA nat-control.

    But i don’t see such command here so can anybody help me to provide such command or give me any hints that how can i pass traffic from inside to outside.

    See below.

    PIX501(config)# sh run
    : Saved
    :
    PIX Version 6.3(5)
    interface ethernet0 auto
    interface ethernet1 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password 8Ry2YjIyt7RRXU24 encrypted
    passwd 2KFQnbNIdI.2KYOU encrypted
    hostname PIX501
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    access-list outbound permit tcp 192.168.1.0 255.255.255.0 any eq www
    pager lines 24
    icmp permit any outside
    icmp permit any inside
    mtu outside 1500
    mtu inside 1500
    ip address outside 110.34.33.124 255.255.255.224
    ip address inside 192.168.1.1 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    pdm logging informational 100
    pdm history enable
    arp timeout 14400
    global (outside) 1 110.34.33.125
    nat (inside) 0 192.168.1.2 255.255.255.255 0 0
    nat (inside) 0 192.168.1.0 255.255.255.0 0 0
    nat (inside) 0 110.0.0.0 255.0.0.0 0 0
    nat (inside) 1 0.0.0.0 0.0.0.0 0 0
    access-group outbound in interface inside
    conduit permit icmp any any
    route outside 0.0.0.0 0.0.0.0 110.34.33.97 1
    timeout xlate 0:05:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout sip-disconnect 0:02:00 sip-invite 0:03:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server TACACS+ max-failed-attempts 3
    aaa-server TACACS+ deadtime 10
    aaa-server RADIUS protocol radius
    aaa-server RADIUS max-failed-attempts 3
    aaa-server RADIUS deadtime 10
    aaa-server LOCAL protocol local
    http server enable
    http 192.168.1.2 255.255.255.255 inside
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    username saeed password xAmbVBkAB7NsAEuT encrypted privilege 15
    terminal width 80
    Cryptochecksum:8ab97282becea14f0c30884e2ce61b10
    : end

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.