GET-IT: TEAMS DAY | 1-Day Free Virtual Conference all about Teams. Here on Petri.com - 8/12/20 GET-IT: TEAMS DAY - 8/12/20

Server 2k3 with 2 NICs – Internet Problem

Home Forums Server Operating Systems Windows Server 2000 / 2003 / 2003 R2 Server 2k3 with 2 NICs – Internet Problem

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    TopClub PC
    Member
    #155506

    Hi wasn’t sure if i should post this question in this area or in general networking but here is my problem! I’m new to all this and this is my first server i think I’ve done well so far…. Please be gentile! :P

    I have a Windows Server 2003 box running DHCP, DNS, AD, File & Printer Share.

    The Server has 2 NICs. One for the internal Network (NIC1) and the other (NIC2) for the internet. Here is my setup (inline):

    Internet

    Belkin Router (DHCP & NAT both on):
    IP: 192.168.2.1

    NIC2 (Auto Obtain) for internet:
    IP: 192.168.2.16
    SNM: 255.255.255.0
    DGW:192.168.2.1
    DHCP Server: 192.168.2.1
    DNS Server: 192.168.2.1

    Server 2k3 (DHCP, DNS, AD, File & Print Share):
    IP: 192.168.1.8

    NIC1 (Static) for internal networking:
    IP: 192.168.1.8
    SNM: 255.255.255.0
    DGW: Blank
    DHCP Server: Not shown in Details
    DNS Server: 192.168.1.8

    Cisco Switch (No info just used as a hub)

    Belkin Router (DHCP: on & NAT: off):

    IP: 192.168.1.1

    PC1 (Office) Wired Direct (Static)
    (Not on Domain – attached as Workgroup Computer)
    IP: 192.168.1.3
    SNM: 255.255.255.0
    DGW: 192.168.1.8
    DNS Server: 192.168.1.8

    PC2 (Shop) Wireless to Router (Static) on Domain:
    IP: 192.168.1.4
    SNM: 255.255.255.0
    DGW: 192.168.1.8
    DNS Server: 192.168.1.8

    The workstations communicate Great with the Server and the Server communicates Great with them (No Problems with file sharing or accessing anything other than the Internet)!

    The Server has Internet Access That works Great.

    However, NONE of the workstations can access the Internet through the Server!!!
    So there is my Question — What do I Need to do to give the workstations the ability to access the internet??? And HOW? Remember I am new to all this so a very detailed explanation and a walk through would be GREAT!!! Thank you in advance!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.