Cisco to Juniper VPN – Vendor ID

Home Forums Networking Cisco Security – PIX/ASA/VPN Cisco to Juniper VPN – Vendor ID

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    alex741
    Member
    #154500

    Hi Guys,
    I am trying to setup a VPN tunnel between my Cisco 837 (Version 12.2(13)ZH4) and my principal’s Juniper on the other side. I can see they talk to each other and exchange keys, but tunnel never goes up.
    As a test, I created another tunnel to Cisco 851 and it worked perfectly.

    I have been told by the Juniper’s administrator do disable sending the vendor ID because of these entries in the isakmp debug log:
    ISAKMP (0:1): constructed NAT-T vendor-03 ID
    ISAKMP (0:1): constructed NAT-T vendor-02 ID
    processing vendor id payload
    vendor ID seems Unity/DPD but major 59 mismatch


    I searched around but I did not find how to disable sending the vendor ID on Cisco 837.

    Any clues?

    Thanks,
    Alex

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.