cisco 881 – am i doing anything wrong ?

Home Forums Networking Cisco Routers & Switches How-to cisco 881 – am i doing anything wrong ?

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    tehcamel
    Member
    #161718

    Just want to validate myself.
    The client has just upgraded a 10M service to a 70M service.
    However – no matter what we do, we can’t seem to exceed more than about 250KB/sec download speed in a single IE session (plus, the director keeps telling me it’s “slow”)

    If I run multiple IE download sessions, I can get 8-10 sessions going with 200+KB/sec for each instance, but cannot seem to find a single source I could download from to demonstrate the speed will max out.
    speedtest.net and a speedtest specific to the IP generally don’t show more than 10M/sec download either.

    I’m wondering if, somehow, there’s something wrong in my admittedly very plain and boring config below. If any QoS or something would help out?

    Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.0(1)M7, RELEASE SOFTWARE (fc2)

    Quote:
    Current configuration : 4729 bytes
    !
    ! Last configuration change at 03:51:43 UTC Fri Jun 7 2013 by admin
    !
    version 15.0
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname WME-RTR-001
    !
    boot-start-marker
    boot-end-marker
    !
    logging buffered 12800 notifications
    !
    no aaa new-model
    memory-size iomem 10
    !
    crypto pki trustpoint TP-self-signed-3010904806
    enrollment selfsigned
    subject-name cn=IOS-Self-Signed-Certificate-3010904806
    revocation-check none
    rsakeypair TP-self-signed-3010904806
    !
    !
    crypto pki certificate chain TP-self-signed-3010904806
    certificate self-signed 01
    (BLA)
    quit
    ip source-route
    !
    !
    !
    !
    ip cef
    ip name-server 8.8.8.8
    no ipv6 cef
    !
    !
    license udi pid CISCO881-K9 sn FGL154125R1
    !
    !
    username admin privilege 15 secret 5 ASECRETPASSWORDHERE
    interface FastEthernet0
    !
    interface FastEthernet1
    shutdown
    !
    interface FastEthernet2
    shutdown
    !
    interface FastEthernet3
    shutdown
    !
    interface FastEthernet4
    description $ETH-WAN$
    ip address 115.70.206.201 255.255.255.254
    ip nat outside
    ip virtual-reassembly
    duplex full
    speed 100
    no cdp enable
    !
    interface Vlan1
    ip address 192.168.10.254 255.255.255.0
    ip nbar protocol-discovery
    ip flow ingress
    ip flow egress
    ip nat inside
    ip virtual-reassembly
    !
    ip forward-protocol nd
    ip http server
    ip http authentication local
    no ip http secure-server
    ip flow-top-talkers
    top 20
    sort-by bytes
    !
    ip nat pool MyPool 115.x.y.a 115.X.Y.f netmask 255.255.255.248
    ip nat inside source list 2 pool MyPool overload
    ip nat inside source static tcp 192.168.X.1 3389 115.Z.Q.Y 3389 extendable
    (more nat BLA along the same lines)
    ip route 0.0.0.0 0.0.0.0 115.1.1.1
    !
    logging trap notifications
    logging 192.168.x.1
    access-list 2 permit 192.168.X.0 0.0.0.255
    !
    !
    control-plane
    !
    !
    line con 0
    no modem enable
    line aux 0
    privilege level 15
    login local
    transport input ssh
    !
    scheduler max-task-time 5000
    end

    Yep – that’s really it. I know that’s very poor firewall control – but one step at a time.

    There’s only data going over this network, no voice. The internal fabric is a bunch of SF300s, (Fast Ethernet, 100Mb/sec) switches, with a single flat vlan, connected with Gigabit uplinks between the switches and the router.

    there’s about 70 seats within the network at the moment.

    anything else that might help paint a picture, let me know :)

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.