Forum Replies Created

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author

  • jessewalt375
    in reply to: DFS Keeps Generating Backlog #652386

    The Get-DfrsBacklog cmdlet retrieves pending updates between two computers that participate in Distributed File System (DFS) Replication.

    Updates can be new, modified, or deleted files and folders. The maximum number of files that this command displays is 100. The Verbose parameter displays a count of all backlogged updates. Any files or folders listed in the DFS Replication backlog have not yet replicated from the source computer to the destination computer. This is not necessarily an indication of problems. A backlog indicates latency, and a backlog may be expected in your environment, depending on configuration, rate of change, network, and other factors.
    Hope this information is helpful.

    • This reply was modified 1 year, 2 months ago by jessewalt375.

    in reply to: How to host a printer on Windows Server? #652367

    -Click start→ Printers and Faxes.
    -Click Add a Printer.
    -Click Next.
    -Select A network printer, or a printer attached to another computer, and then click Next. If the printer is not listed, type the path to the printer in the text box.
    The server host name is the name of the server computer that identifies it on the network. The shared printer name is the name assigned during the server installation process.
    -Click Browse for a printer, and then click Next.
    If this is a new printer, you may be prompted to install a printer driver. If no system driver is available, you need to specify the path to available drivers.
    -Select Yes if you want this printer to be set as the default printer, and then click Next.
    If you want to verify installation, click Yes to print a test page.
    -Click Finish.
    Hope this helps you to setup your printer. also, get loads of information about Virtual desktops to carryout heavy tasks remotely. visit CloudDesktopOnline Today.

    in reply to: Server 2016 CALs help #652366

    Microsoft Windows Server Client Access Licenses (CALs)
    A Windows Server CAL is a license that allows customers to access Windows Server. CALs are used in conjunction with Microsoft Windows Server OS licenses to allow Users and/or Devices to access and utilize the services of that server OS.

    If your customers are wanting to run Windows Server 2016 on their new HPE Gen10 server, they would acquire a Windows Server 2016 OS license in order to run the Windows Server software on the physical server AND they would need to acquire CALs for the Users or Devices who will access the server.

    This two-component license models provides a low entry price and a way to pay for capacity used: the more devices or users accessing the server software, the greater the license fees or price. This model therefore offers license affordability to organizations of all sizes.
    HPE offers several different types of Windows Server CALs.

    User CALs allow a single user access to Windows Server from an unlimited number of devices
    Device CALs allow an unlimited number of users to access Windows Server from a single device
    Hope this information is helpful to you if you need more information ablout servers then Apps4Rent is just for you.


    Not in specific order:-
    1. CtrlS
    2. ESDS
    3. GPX Global Systems Inc.
    4. Netmagic
    5. NxtGen
    6. Nxtra Data Limited
    7. Sify Technologies
    9. Web Werks

    in reply to: Storage linit on Azure #652322

    Every standard storage in azure has 32,767GB of storage.
    Each data disk has a maximum capacity of 32,767 gibibytes.
    The size of the virtual machine determines how many data disks you can attach to it and the type of storage you can use to host the disks.

    I hope this helps you.


    To Resolve the issue from the Exchange Server Database (EDB file) you can simply get the help of this free tool of eSoftTools Exchange Server Database Recovery Software. It will securely recover all of your lost Exchange mailbox items through the Exchange EDB file to various different file formats such as- PST, EML, EMLX, MSG, and HTML to access those items without Exchange server.
    To never face such problem again you can switch to cloud services as they offer a corruption-free and secure environment for your valuable data. I recommend visiting for more information about cloud services.


    Use the following steps:-
    1. At the top of your Outlook ribbon, choose File.
    2.Choose Open & Export > Import/Export.
    3. Choose Export to a file.
    4.Click Outlook Data File (.pst)> Next.

    5.Select the name of the email account to export, as shown in the picture below. Only information for one account can be exported at a time.Make sure that the Include subfolders check box is selected. This ensures that everything in the account will be exported: Calendar, Contacts, and Inbox. Choose Next.
    6.Click Browse to select where to save the Outlook Data File (.pst). Enter a file name, and choose OK to continue.
    7.If you are exporting to an existing Outlook Data File (.pst), under Options, specify what to do when exporting items that already exist in the file.
    8. Choose Finish.
    9. Outlook begins the export immediately unless a new Outlook Data File (.pst) is created or a password-protected file is used.
    Hope this solves your problem.

    in reply to: Review of QuickBooks? #652295

    This review is divided into pros and cons for better and quick understanding.
    -Excellent user interface and navigation.
    -In-depth contact records and transaction forms.
    -Project profitability.
    -Customizable reports.
    -Comprehensive payroll support.
    -Hundreds of add-ons and integrations.
    -New mileage tracking.

    -Poor online documentation.

    in reply to: How to Setup a Microsoft Azure Virtual Network #652293

    1.From the Azure portal menu, select Create a resource. From the Azure Marketplace, select Networking > Virtual network.

    2.In Create virtual network, enter or select this information:

    Setting : Value
    Subscription : Select your subscription.
    Resource group : Select Create new, enter myResourceGroup, then select OK.
    Name : Enter myVirtualNetwork.
    Location : Select East US.

    3. Select Next: IP Addresses, and for IPv4 address space, enter

    4. Select Add subnet, then enter myVirtualSubnet for Subnet name and for the Subnet address range.

    5. Select Add, then select Review + create. Leave the rest as default and select Create.

    6. Create virtual network, select Create.

    Hope this helps you.

    • This reply was modified 1 year, 2 months ago by jessewalt375.

    in reply to: Is Azure expensive? #652292

    Azure is actually not very expensive. Azure’s pricing for the services it offers are very similar to it’s competitors such as AWS or GCP. If you feel like Azure is charging you more than it should then make sure you are not running and/or using services that are not in use as that would cost more, no matter which platform you use. Such as destroy Virtual Machines if not in use, do not start services before you are going to need or use them.

    in reply to: What is Microsoft Azure used for? #652291

    Microsoft Azure is a public cloud computing platform with solutions including Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service (SaaS) that can be used for services such as analytics, virtual computing, storage, networking, and much more. It can be used to replace or supplement your on-premise servers
    Microsoft Azure can be used for:-
    1. Enhance and Implement Backup and Disaster Recovery
    2. Host and Develop Web and Mobile Apps
    3. Distribute and Supplement Active Directory
    4. Innovate with IoT Industry Solutions

    Hope this is informative to you.

    in reply to: Share your experiences about Private Cloud storage #652266

    Private cloud storage is similar to public cloud storage in that it provides the usability, scalability and flexibility of the storage architecture. But unlike public cloud storage, it is not publicly accessible and is owned by a single organization and its authorized external partners.Private cloud storage is a type of storage mechanism that stores an organization’s data at in-house storage servers by implementing cloud computing and storage technology.

    I have been using Private Cloud storage for my business and I can be happy about it that my data and information is been stored at an virus and threat free environment.I am using this service from a service provider called Apps4Rent and would recommend everyone who is looking for a cloud service provider.
    Do check their site for more information on cloud services.

    in reply to: How many types of QuickBooks Hosting are there? #652265

    There are 5 types of QuickBook Hostings and Authorized third-party hosting providers can host the following QuickBooks:
    QuickBooks Desktop Pro.
    QuickBooks Desktop Premier.
    QuickBooks Accountant Desktop.
    QuickBooks Desktop Enterprise Solutions.
    QuickBooks Desktop Point of Sale.

    Hope This was Beneficial for you guys.
    Checkout for more information on Quickbooks.

    in reply to: How to Recover Deleted Documents in SharePoint #652262

    To Recover Deleted Documents in SharePoint use the following steps:-

    1.Log in to the site as the site collection administrator.
    -Your SharePoint administrator in IT can look up this account information.

    2.Click the Settings gear icon and choose Site Settings.
    -The Site Settings page appears.

    3.In the Site Collection Administration section, click the Recycle Bin link.

    4.In the Recycle Bin’s left navigation pane, click the Deleted from End User Recycle Bin link.

    5.Click the items you want to restore and click Restore Selection.
    -The items are restored.

    To know more about Sharepoint visit

    Hope this is helpful for you.

    in reply to: Infrastructure setup for small organization #652261

    I would Recommend to use a cloud Infrastructure instead of the traditional Infrastructure as there are many advantages like Cost, Time , agility , flexibility and security associated in it. i myself use an cloud infrastructure for my business and I have been able to double my profits even in the pandemic. I use an Cloud service Provider called Apps4Rent for my requirements and would recommend it to you too. do check them out on

    Hope this is helpful to you.

Viewing 15 posts - 1 through 15 (of 15 total)
Don't leave your business open to attack! Come learn how to protect your AD in this FREE masterclass!REGISTER NOW - Thursday, December 2, 2021 @ 1 pm ET

Active Directory (AD) is leveraged by over 90% of enterprises worldwide as the authentication and authorization hub of their IT infrastructure—but its inherent complexity leaves it prone to misconfigurations that can allow attackers to slip into your network and wreak havoc. 

Join this session with Microsoft MVP and MCT Sander Berkouwer, who will explore:

  • Whether you should upgrade your domain controllers to Windows Server
    2019 and beyond
  • Achieving mission impossible: updating DCs within 48 hours
  • How to disable legacy protocols and outdated compatibility options in
    Active Directory

Sponsored by: