I’m working on trying to configure a VLAN using a 3com 4500G Switch. I’m able to log into the management console. I go to Device-VLAN. I create VLAN 5 and untag Port 5.
So, basically all ports are untagged for VLAN 1 (default), except for Port 5 which is untagged for VLAN 5.
When I plug in my laptop to Port 5, I’m not getting an IP Address. I’ve used DHCP and set a manual IP Address of 192.168.5.X for VLAN 5. The Gateway is 192.168.1.1
I’m new to VLAN configuration, so I’m not sure what I’m missing with the configuration.
The switch is connected to a Cisco Linksys ES3200.