show interface problem

Home Forums Networking Cisco Routers & Switches How-to show interface problem

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    orennu
    Member
    #143314

    hi
    i’m having a weird problem on my router
    the interface is down ,down but i see input packets increasing and traffic is passing via this interface.
    i added output from the router :
    PT_Access-A_A6#sh int s0/2/2
    Serial0/2/2 is down, line protocol is down
    Hardware is HWIC-Serial
    Description: GLX1120 CDM600
    Interface is unnumbered. Using address of FastEthernet0/0 (10.0.0.20)
    MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,
    reliability 255/255, txload 1/255, rxload 235/255
    Encapsulation HDLC, loopback not set
    Keepalive not set
    Last input 00:00:58, output 3w1d, output hang never
    Last clearing of “show interface” counters 00:00:06
    Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
    Queueing strategy: weighted fair
    Output queue: 0/1000/64/0 (size/max total/threshold/drops)
    Conversations 0/1/256 (active/max active/max total)
    Reserved Conversations 0/0 (allocated/max allocated)
    Available Bandwidth 1536 kilobits/sec
    5 minute input rate 3947000 bits/sec, 2722 packets/sec
    5 minute output rate 0 bits/sec, 0 packets/sec
    18375 packets input, 3480198 bytes, 0 no buffer
    Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
    0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
    0 packets output, 0 bytes, 0 underruns
    0 output errors, 0 collisions, 0 interface resets
    0 output buffer failures, 0 output buffers swapped out
    0 carrier transitions
    DCD=up DSR=down DTR=up RTS=up CTS=down

    if any one encountered this issue and has some inputs i will appreciate it.
    thanks in advance

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.