routing between vlans Question

Home Forums Networking Cisco Routers & Switches How-to routing between vlans Question

Viewing 1 post (of 1 total)
  • Author
  • Avatar

    Hello All

    I have been testing this for a while, I have a few questions. I have a hp Switch 2910 I have split this up into 4 Vlans. I added a mac address to windows server 2003 dchp of of switch A and Switch B. vlan 1 works. I have enable ip routing, do i need to add a route (back to our gateway of I get invaild input

    I get Show IP route entries
    Dest – Gateway – vlan – type – subtype – metric – dist reject statis 0 0 lo0 connected 1 0 dmz 100 connected 1 0 Test Vlan 1 connected 1 0

    Switch A Config
    Running configuration:

    ; J9147A Configuration Editor; Created on release #W.14.38

    hostname “TestSwitchoffice”
    module 1 type J9147A
    mirror-port 1
    ip routing
    vlan 1
    name “Test Lan”
    untagged 1-12
    ip address dhcp-bootp
    tagged 48
    no untagged 13-47
    vlan 100
    name “DMZ”
    untagged 37-47
    ip address
    tagged 48
    vlan 20
    name “Voip”
    untagged 13-24
    ip address
    vlan 30
    name “UP Lan”
    untagged 25-36
    ip address
    interface 40
    banner motd “This is a private system maintained by the Test Corporation”
    snmp-server community “public” unrestricted
    snmp-server contact “Admin” location “Masta Office BoxRoom”

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.