Problem with AD replication and GPO applying on TS

Home Forums Microsoft Networking and Management Services Active Directory Problem with AD replication and GPO applying on TS

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    energo
    Member
    #103214

    Hello,

    A little info:

    I have two sites, A and B. On site B is a terminal server, which I log in to.
    The DC/AD master is on site A.
    A DC/AD server is also set up on site B

    However, there seems to be a problem with DNS lookups from
    site B to A. I can ping allright, but for instance a browse on file/shares
    terminates with error: “the network path specified is no longe available”.

    But, all is ok if I browse going on the -IP- of the servers (from site A) it’s
    just when I try to reach a resource on -name- lookup it fails.
    On the firewall there should not be any limitations on the IP traffic.

    Also, browsing resources from site A, the other way around, works ok.
    I am able to open up the AD on the AD-server on site B and make changes.

    So the problem appares to be only going from site B to A, not the other
    way around.

    But, this results in the two mentioned problems: AD replication and applying Group Policy. From site B, DCdiag etc. all tells of problems
    reaching the AD master on site A. More precicely DCdiag has this
    section:

    Doing primary tests

    Testing server: FACASPxx01
    Starting test: Replications
    ……………………. FACASPxx01 passed test Replications
    Starting test: NCSecDesc
    ……………………. FACASPxx01 passed test NCSecDesc
    Starting test: NetLogons
    [ASPDB01] An net use or LsaPolicy operation failed with error -1073610729, Win32 Error -1073610729.
    ……………………. ASPxx01 failed test NetLogons
    Starting test: Advertising
    Fatal Error:DsGetDcName (ASPxx01) call failed, error 1722
    The Locator could not find the server.
    ……………………. ASPxx01 failed test Advertising
    Starting test: KnowsOfRoleHolders
    ……………………. ASPxx01 passed test KnowsOfRoleHolders
    Starting test: RidManager
    ……………………. ASPxx01 passed test RidManager
    Starting test: MachineAccount
    Could not open pipe with [ASPxx01]:failed with 64: Win32 Error 64
    Could not get NetBIOSDomainName
    Failed can not test for HOST SPN
    Failed can not test for HOST SPN
    * Missing SPN :(null)
    * Missing SPN :(null)
    ……………………. ASPxx01 failed test MachineAccount
    Starting test: Services
    Could not open Remote ipc to [ASPxx01]:failed with 64: Win32 Error 64
    ……………………. ASPxx01 failed test Services
    Starting test: ObjectsReplicated
    ……………………. ASPxx01 passed test ObjectsReplicated
    Starting test: frssysvol
    [ASPDB01] An net use or LsaPolicy operation failed with error 64, Win32 Error 64.
    ……………………. ASPxx01 failed test frssysvol
    Starting test: frsevent
    ……………………. ASPxx01 failed test frsevent
    Starting test: kccevent
    Failed to enumerate event log records, error Win32 Error 64
    ……………………. ASPxx01 failed test kccevent
    Starting test: systemlog
    Failed to enumerate event log records, error Win32 Error 64
    ……………………. ASPxx01 failed test systemlog
    Starting test: VerifyReferences
    ……………………. ASPxx01 passed test VerifyReferences

    So, if anyone has any ida n what’s causing this, and/or a workaround
    getting the replication going from site A to B I would be forever greatful.
    Is it possible to do a one-way “push” from site A, for instance?

    As you probably can se, I am also quite new to this, so any thoughts
    are much appreciated.

    Thank’s in advance.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.