PIX 515E initial config problems

Home Forums Networking Cisco Routers & Switches How-to PIX 515E initial config problems

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    venellinus
    Member
    #122508

    Hi all,
    I am tryin for first time to configure Cisco PIX 515E, and somehow I ‘ve got stuck.
    I have “inside” on 192.168.1.0 and “outside” on 192.168.0.0; configured DNS; Have route to my Internet router(192.168.0.1); In console have ping to yahoo.com, for example. But from inside dont have internet.
    The all config is:
    ip address inside 192.168.1.200 255.255.255.0
    ip address outside 192.168.0.200 255.255.255.0

    route outside 0 0 192.168.0.1
    nat (inside) 1 192.168.1.0 255.255.255.0
    global (outside) 1 192.168.0.0

    access-list outbound permit tcp 192.168.1.0 255.255.255.0 any eq 80
    access-list outbound permit tcp 192.168.1.0 255.255.255.0 any eq 53
    access-group outbound in interface inside

    When i trace packet with the Packet tracer, i got stuck on implicit rules “any-to-any deny”. I cant remove the rule, I added additional rules “TCP any-to-any”, but nothing…

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.