Neworking Issue

Home Forums Networking General Networking Neworking Issue

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    usits
    Member
    #127661

    I have a huge network issue that I need to resolve by tomorrow so any help/ideas will be appreciated.

    Here is the network setup:

    Main Site:
    Juniper Netscreen 204 Firewall with 4 Ports.
    eth1 = 192.168.8.1/24
    eth2 = 192.168.9.1/24
    eth3 = WAN IP

    eth1 and eth2 both are connected to a L3 Manged switch with an IP of 192.168.8.76 (Currently there are no VLAN’s setup on the switch)

    Remote Site:
    Juniper SSG5:
    bgroup0/eth0/0 = WAN IP
    bgroup2/eth0/2 = 10.5.24.1/24

    – There are multiple VPN’s going to eth1 Network and they work ok no issues there.
    – I am trying to setup another VPN to 192.168.9.1/24 network.
    – VPN connects fine from the remote site, however I can not ping any hosts by IP or host name on the 192.168.9.1/24 network from the remote site.

    Here is what I think: I need to create VLAN’s on the switch and separate both 192.168.8.x/24 and 192.168.9.x/24 networks or use two switches.

    Any ideas, suggestions will be greatly appreciated. Thank you.

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.