NAT with VPN Site to Site and Remote LANs with same IP address

Home Forums Networking Cisco Security – PIX/ASA/VPN NAT with VPN Site to Site and Remote LANs with same IP address

Viewing 1 post (of 1 total)
  • Author
    Posts

  • lmperso
    Member
    #162902

    Hello
    I have a ASA5510 to connect clients to my compagny. I use vpn ipsec site to site with different VPN equipments to the other side (Cisco, Sonicwall, Zyxel, Checkpoint … ).
    For every remote Lan I translate the network client in an only IP address
    For instance
    Client1 192.168.1.0/24 Dynamic PAT (hide) a.b.c.1/24
    Client2 172.16.0.0/16 Dynamic PAT (hide) a.b.c.2/24
    Client3 172.17.4.0/26 Dynamic PAT (hide) a.b.c.3/24

    Everything is working fine but now I have a new client with the same IP network as client1
    I tried
    Clientn 192.168.1.0/24 Dynamic PAT (hide) a.b.c.n/24
    But when I did it the client1 loose the connection and i had to remove the clientn network …

    Do you have an idea to permit same remote IP addresses to use VPN ?
    For information i use ASDM to setup the ASA.

    Regards
    Laurent
    Sorry for my english …

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.