I can not enable PBR on interface vlan

Home Forums Networking Cisco Routers & Switches How-to I can not enable PBR on interface vlan

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    acgch
    Member
    #154041

    How about friends?, in days past I put a post where you asked, because I could not enable PBR on my switch 3560 with ios c3560-ipbase-mz.122-25.SEE2, the reason is that it should have a ios c3560-ipservicesk9-mz.122-55.SE1.bin. Download it, update the ios and started to set, when I try to enable the ip policy route-map pbr, accepts the command but never get to see the show run the line at the interface, which is a vlan.

    Any idea what is happening.

    This is part of my setup:

    l3-core#show route-map
    route-map webcache-redirect, permit, sequence 10
    Match clauses:
    ip address (access-lists): webtraffic
    Set clauses:
    ip next-hop 192.168.10.1
    Policy routing matches: 0 packets, 0 bytes
    route-map webcache-redirect, permit, sequence 20
    Match clauses:
    Set clauses:
    Policy routing matches: 0 packets, 0 bytes

    Extended IP access list webtraffic
    10 deny tcp host 192.168.10.1 any eq www
    20 permit tcp host 192.168.2.10 any eq www
    30 permit tcp host 192.168.2.11 any eq www

    interface Vlan2
    description INFORMATICA
    ip address 192.168.2.254 255.255.255.0
    ip helper-address 192.168.10.9
    ip helper-address 192.168.10.40
    !

    In this interface I should see

    ip policy route-map webcache-redirect

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.