Group Policy Failed / No Files Access

Home Forums Server Operating Systems Windows Server 2008 / 2008 R2 Group Policy Failed / No Files Access

Viewing 1 post (of 1 total)
  • Author
  • Avatar

    Hello, Dear Team,

    Since 1 week, my Files Services Access is not possible and it seems
    that the Policy is stopping on the Windows 2008 Server. I had a look on
    the Dell Server Administrator but there are not “Hardware problem”.

    A different times, no users can access the File Services.
    When going on the server I see some Events regarding “Group Policy
    Failed”, after rebooting the server manually directly from the server,
    everything is ok and all the users can go back to work on the different
    “Shared Folders”.

    1) I noticed on the “Administratives Events” that the GROUP POLICY FAILED:

    “The processing of Group Policy failed. Windows attempted to read
    the file
    from a domain controller and was not successful. Group Policy settings
    may not be applied until this event is resolved. This issue may be
    transient and could be caused by one or more of the following:

    a) Name Resolution/Network Connectivity to the current domain controller.

    File Replication Service Latency (a file created on another domain
    controller has not replicated to the current domain controller).

    c) The Distributed File System (DFS) client has been disabled.”

    2) After the Group Policy Failed, “Administrative Events” shows also that “Data Corruption may occur”:

    • The driver detected that the device DeviceHarddisk0DR0 has its write cache enabled. Data corruption may occur.
    • Volume
      Shadow Copy Service error: Unexpected error calling routine
      hr = 0x80070005, Access is denied.


    Initializing Writer

    Writer Class Id: {e8132975-6f93-4464-a53e-1050253ae220}
    Writer Name: System Writer
    Writer Instance ID: {d272cca4-3c59-4411-8d5c-1b36555903b8}”

    • “Active Directory Domain Services could not disable the software-based disk write cache on the following hard disk.

    Hard disk:

    Data might be lost during system failures.”

    The RAID Controller is a Software based controller, there is 2 Disk in Raid 1.
    please let me know if you have heard about this issue, thank you!!!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.