Getting a Cisco Aironet 1200 series working on a specific VLAN…

Home Forums Networking Cisco Routers & Switches How-to Getting a Cisco Aironet 1200 series working on a specific VLAN…

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    ckoeber
    Member
    #143603

    Hello,
    I have a Cisco Catalyst 2950 XL Layer Three switch that I am trying to connect with a Cisco Aironet 1200 Series Access Point. The switch is connected to other switches throughout the campus and the campus has several VLANs defined on our distribution switch (A Cisco Catalyst 4506 switch with routing capabilities). The configuration for that system is attached as 4506.txt.
    The Cisco Catalyst 2950 XL switch is attached as 2950.txt and the AP is attached as AP.txt.
    The 2950 switch on FastEthernet Port 0/24 is connected to the larger 4506 switch at port FastEthernet 3/1.
    The AP is connected to the 2950 switch on port FastEthernet 0/17.
    The problem is that I need the AP to operate on VLAN 60 but the AP is ONLY operating on VLAN 10.
    If I switch a port on the 2950 to VLAN 60 I can plug a laptop into that port and access that VLAN but the AP cannot do so.
    What am I doing wrong? Thank you for your time.
    Regards,
    Christopher Koeber

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.