DHCP Using external IP Address

Home Forums Server Operating Systems Windows Server 2000 / 2003 / 2003 R2 DHCP Using external IP Address

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    m80arm
    Member
    #113883

    Afternoon guys,

    I have just finished setting up my test network for 70-284 with one little problem.

    I have two VM’s (Windows 2003 SP1 fully patched) one VM has 2 nics

    Eth0 – connected to my 10.x.x.x net work
    Eth1 – Connected to my virtual 192.168.x.x network where the other server is located.

    This is so both machines have internet access and I have routing and remote access configured so I can connect to both machines via remote desktops from my main pc on the 10.x.x.x network.

    The problem I am having is that when I went to set-up DHCP server01 thinks it’s IP address is 10.1.1.x when it should be 192.168.0.1 – It’s using eth0 as it’s IP address instead of Eth1.

    Anyone know how to change this?

    Eth0 does not update DNS and is other there as a connection to my physical network for me to access the VM and internet access

    Thanks

    Michael

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.