DHCP Using external IP Address Share on Facebook Post on reddit Tweet on Twitter Share on LinkedIn Home › Forums › Server Operating Systems › Windows Server 2000 / 2003 / 2003 R2 › DHCP Using external IP Address This topic has 3 replies, 2 voices, and was last updated 14 years, 5 months ago by m80arm. Viewing 1 post (of 1 total) Author Posts m80armMember Jun 21, 2006 at 10:46 am #113083 Afternoon guys, I have just finished setting up my test network for 70-284 with one little problem. I have two VM’s (Windows 2003 SP1 fully patched) one VM has 2 nics Eth0 – connected to my 10.x.x.x net work Eth1 – Connected to my virtual 192.168.x.x network where the other server is located. This is so both machines have internet access and I have routing and remote access configured so I can connect to both machines via remote desktops from my main pc on the 10.x.x.x network. The problem I am having is that when I went to set-up DHCP server01 thinks it’s IP address is 10.1.1.x when it should be 192.168.0.1 – It’s using eth0 as it’s IP address instead of Eth1. Anyone know how to change this? Eth0 does not update DNS and is other there as a connection to my physical network for me to access the VM and internet access Thanks Michael Author Posts Viewing 1 post (of 1 total) You must be logged in to reply to this topic.