DHCP Setup Help !!! not responding to DHCP requests!

Home Forums Server Operating Systems Windows Server 2000 / 2003 / 2003 R2 DHCP Setup Help !!! not responding to DHCP requests!

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    mike2016
    Member
    #128148

    We just got T1 service installed, and we have 1 Dell 2950 server, it’s our web server, database server, application server and a domain controller.

    My connection is setup like this

    T1 -> Cisco 1721 router -> switch -> server, workstations, net printers..etc.

    AD is installed, and dcpromo’d. DNS configured correctly.

    now i want to run DHCP on this server, the DHCP on the cisco router is turned off. (we were using the DSL router as DHCP before)

    We are assigned static IPs from our ISP, like below

    usable IP range: 216.32.155.1 – 216.32.155.6
    Broadcast address: 216.32.155.7
    router IP 216.32.155.1
    subnet mask: 255.255.255.248
    DNS 1: 216.116.96.2
    DNS 2: 216.116.96.3

    1st NIC is setup as static IP like above, I assigned 216.32.155.2 to the server, 2nd NIC is disabled for now.

    so I setup the DNS on the server, and in the NIC properties, DNS is setup to the server IP, and in DNS forwarder i set it to forward all queries to our ISP DNS 216.116.96.2 /3

    the server has access to internet and everything.

    DHCP is setup like this
    Start IP: 192.168.0.14
    End Ip : 192.168.0.47
    Subnet: 255.255.255.0
    Scope Option>Router> 216.32.155.1 (T1 router)
    Scope Option>DNS Server> 216.116.96.2 /3

    while on the workstations, they are not getting any DHCP response at all.

    Did i assign wrong IPs in that DHCP table?

    I do not want to assign real IPs to workstations, I want to assign private block of IPs to the internal machines, like how it was before with the DSL router.

    Can anyone point me to the right direction? Please help!!

    Thanks in advance!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.