Cisco 2650XM T1 issue

Home Forums Networking Cisco Routers & Switches How-to Cisco 2650XM T1 issue

Viewing 1 post (of 1 total)
  • Author
  • Avatar

    Hello. I am having trouble bringing up a T1 on a 2650XM router. I am using a VWIC-2MFT-T1 card in the 2650. The other device is a
    Cisco 7206. If I pull out the VWIC-2MFT-T1 and put it in a 1721 the T1 comes right up, so it seems the card is ok and the 2650 requires something additional in the code.

    This is what I have on the 7206:

    controller T1 6/0
    framing esf
    clock source internal
    linecode b8zs
    channel-group 0 timeslots 1-24

    interface Serial6/0:0
    ip address

    This is what I have on the 2650XM:

    Router#sh run
    Building configuration…

    Current configuration : 962 bytes
    version 12.3
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Router
    no network-clock-participate slot 1
    no network-clock-participate wic 0
    no aaa new-model
    ip subnet-zero
    ip cef
    controller T1 0/2
    framing esf
    clock source free-running
    linecode b8zs
    channel-group 1 timeslots 1-24
    interface Serial0/2:1
    ip address

    The carrier detect light is green on the 2650 WIC. The status of the interface is up/down. I can use the same config on the 1721 to bring the circuit up.

    Anyone know what I am missing here?


Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.