Catalyst 2950 being kwirky

Home Forums Networking Cisco Routers & Switches How-to Catalyst 2950 being kwirky

Viewing 1 post (of 1 total)
  • Author
    Posts
  • Avatar
    BPenney
    Member
    #161266

    I have a Catalyst 2950 that will work fine until a connection from a router is plugged in. I can console in and change configuration. Once I plug ethernet into the switch from a router all of the status port LEDs will go orange and the SYST led will blink green.

    This is what the console session showed:

    00:31:38: %PLATFORM_CATALYST2950-1-CRASHED: System previously crashed with the f ollowing message:
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Crash info file is flash:/crashinfo/ crashinfo_3423
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED:
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: C2950 Software (C2950-I6Q4L2-M), Ver sion 12.1(11)EA1, RELEASE SOFTWARE (fc1)
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Compiled Wed 28-Aug-02 10:25 by anto nino
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Signal = 10, Code = 0x8, Uptime 00:0 8:30
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: r0: 00000000, AT: 00000000, v0: 8080 0000, v1: 00000007
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: a0: 80670000, a1: 0000E700, a2: 80E1 8FE4, a3: 00000000
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: t0: A08F8DFC, t1: 1000E701, t2: 1000 0000, t3: FFFF00FF
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: t4: 802F3CF0, t5: 00000001, t6: 0000 0000, t7: 00000000
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: s0: 807C0000, s1: 00000000, s2: 0000 0000, s3: 00000001
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: s4: A08F8DEE, s5: 00000008, s6: 80D2 9D88, s7: 00000001
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: t8: 00000000, t9: 00000000, k0: 0000 0000, k1: 00000000
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: gp: 8073C620, sp: 80D38630, s8: 0000 0000, ra: 8043C34C
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: EPC: 8043B7DC, ErrEPC: 802F19B8, Bad VA: 0x00000005, SREG: 1000E703
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Cause: 0x00000008 (code 2): TLB (loa d or ifetch) exception
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Signal 10, Exception code (0x0008)!
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED:
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Frame 00: SP = 0x80D38630 PC = 0x 8043B7DC
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Frame 01: SP = 0x80D38688 PC = 0x 8043C34C
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Frame 02: SP = 0x80D38708 PC = 0x 801BEBE4
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: Frame 03: SP = 0x80D38720 PC = 0x 801BEBD0
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED:
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED:
    00:59:39: %PLATFORM_CATALYST2950-1-CRASHED: -Traceback= 8043B7DC 8043C34C 801BEB E4 801BEBD0
    % Please answer ‘yes’

    Help please!

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.