cannot ping inside

Home Forums Networking Cisco Security – PIX/ASA/VPN cannot ping inside

Viewing 1 post (of 1 total)
  • Author
  • Avatar

    Hi there,

    i am newbie on configuring ASA firewall. I got stuck on configuring NAT and ACLs.
    My big problem are:

    1) The inside network cannot communicate with interface on inside ASA firewall

    Here are the situation:

    i have 3 interface:

    outside –
    DMZ –
    inside –

    FYI, my ASA are running ACTIVE/ACTIVE failover.

    I have 2 core switch that connected both ASA that i was assign the ip address (core1) that directly connected to inside interface ASA_1 ( and ip address connected to inside interface ASA_2 ( On core switch, i put the last resort gateway for core1 and core2 The internal routing (from core switch and below) is ok, no problem at all. The problem is, from the core switch, i cant ping the inside interface on both ASA. I already configure the ACLs any to any to pass all the traffic but it seems not working.

    thanks for your help…

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.